TUBE CLAMPS ACCORDING TO DIN 3015

RSB TUBE CLAMPS is a trademark which stands for quality and innovation. Our products are exported worldwide and are synonymous with a cost effective solution for a simple but secure fastening of tubes and hoses. Their noise and vibration damping properties are an important contribution to health and safety as well as to environmental protection.


Our company has successfully achieved auditing by numerous international certification organisations, which gives our customers confidence in our ability to achieve what we promise. This together with our fast turnaround of orders from our factory, subsidiary and worldwide distribution partners ensures that RSB TUBE CLAMPS will give prompt service for all special designs.

 

TUBE CLAMPS SERIES A (LIGHT CONSTRUCTION CLAMPS) DIN 3015 PART 1

THE INNOVATIVE DESIGN
COPIED FROM NATURE - THE HONEYCOMB DESIGN

 

The Advantages

  • optimised product geometry
  • provides excellent pressure distribution
  • thus high tube holding forces

 

 

RAIL NUT
NOISE AND VIBRATION DAMPING

 

 

 

TUBE CLAMPS SERIES A | DIN 3015 | Part 1 | Components

 

TUBE CLAMPS SERIES A | DIN 3015 | Part 1 | COMPLETE RANGE

TUBE CLAMPS SERIES B (TWIN-TUBE CLAMP) DIN 3015 PART 3

TUBE CLAMPS Series B

Simultaneous assembly of 2 tubes, hoses, wires and other components. Combinations of different diameters in one clamp body are available on request. Clamp bodies are made of various plastics or aluminium; with vibration and noise dampening properties and UV, weather and chemical resistance – even in extreme conditions. Metal parts are also available in stainless steel.

 

 

 

 

TUBE CLAMPS SERIES B | Components

TUBE CLAMPS SERIES B | COMPLETE RANGE

TUBE CLAMPS SERIES C (HEAVY SERIES) DIN 3015 PART 2

TUBE CLAMPS Series c

Fixing of tubes and hoses of both standard metric and inch outer diameters. Clamp bodies made of various plastics or aluminium; with vibration and noise dampening properties and UV, weather and chemical resistance – even in extreme conditions. Metal parts are also available in stainless steel.

 

 

 

 

TUBE CLAMPS SERIEC C | COMPONENTS

TUBE CLAMPS SERIES C | COMPLETE RANGE

SENSOR CLAMPS SERIES A

SENSOR CLAMPS

These are clamps for fixing proximity switches according to EN 50025 and 50037. Metal parts have to be used from the standard programme of series A according to DIN 3105. When mounted on mounting rails, the sensors can be adjusted axially and laterally.

 

 

 

 

SENSOR CLAMPS

TUBE CLAMPS SERIES A …2+5 SYSTEM

TUBE CLAMPS SERIES A …2+5 SYSTEM

The 2+5 RSB tube clamp system covers all tube diameters from 6 to 42 mm with only one tube clamp size. Metal parts can be used from our standard programme of series A (light construction clamp) according to DIN 3105-1.

 

 

 

 

TUBE CLAMPS SERIES A …2+5 SYSTEM | COMPONENTS

CLAMP BODIES PP-CR

THE SOLUTION FOR APPLICATIONS SUSCEPTIBLE TO CORROSION

The basis of PP-CR is the proven polypropylene. Crevice corrosion between the clamp halves and the tubes is retarded by a special corrosion inhibitor. These properties have been tested and successfully approved in salt spray tests according to DIN EN ISO 9227. RSB clamp bodies made of PP-CR are available in all standard dimensions according to DIN 3015. Alternative designs and tube diameters are available on request.

 

 

                                                     

 

 

PP-CR THE CORROSION INHIBITOR

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES A

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES A

Noise absorbing and vibration dampening properties are an important contribution to health and safety and environment protection. Clamp bodies with a separate noise protection insert are a highly effective noise protection and vibration dampening and at the same time a smooth fastening of hoses.

 

 

 

 

 

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES A

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES C

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES C

Noise absorbing and vibration dampening properties are an important contribution to health and safety and environment protection. Clamp bodies with a separate noise protection insert are a highly effective noise protection and vibration dampening and at the same time a smooth fastening of hoses.

 

 

 

 

 

 

 

TUBE CLAMPS WITH NOISE PROTECTION INSERT SERIES C 

TUBE CLAMPS ACCORDING TO DIN 3015 – AVAILABLE VERSIONS

VERSIONS OF CLAMP BODIES AND METAL PARTS ACCORDING TO DIN 3015

 

 

 

 

 

 

TUBE CLAMPS ACCORDING TO DIN 3015

ORDER CODE

ORDER CODE

From the order code of RSB TUBE CLAMPS you can see the series, material and the corresponding version. Our labelling system has been tested and approved by international certification companies such as Germanischer Llyod, Lloyd’s Register of Shipping, Bureau VERITAS, ABS (American Bureau of Shipping).)

 

 

ORDER CODE

TECHNICAL DATA

MATERIAL PROPERTIES

MATERIAL PROPERTIES

 

 

SCREW TIGHTENING TORQUE AND PIPE SHEARING FORCES

TECHNICAL DATA| TUBE CLAMPS

 

 

SPECIAL MATERIALS

SPECIAL MATERIALS FOR TUBE AND HOSE CLAMPS

 

 

ASSEMBLY INSTRUCTIONS

 

ASSEMBLY| TUBE CLAMPS

APPLICATIONS

MOBILE HYDRAULIC SYSTEMS

INDUSTRIAL HYDRAULIC SYSTEMS

WIND POWER STATIONS

Offshore

SHIPBUILDING INDUSTRY

MINING INDUSTRY

PLANT CONSTRUCTION

WAGON CONSTRUCTION

AGRICULTURAL ENGINEERING

FOOD INDUSTRIES

 

YOUR CONTACTS

Phone: 07423 / 9298-36
Fax: 07423 / 9298-55
fkb@fkb-gmbh.com

 

CATALOGUE

 

 

 

YOU WILL FIND OUR FULL PRODUCT RANGE IN THE CATALOGUE.